SUNNYVALE, USA: Maxim Integrated Products Inc. announced the MAX14578E/MAX14578AE, the industry's smallest USB battery charger detectors that are compliant with the USB Battery Charging Specification.
These devices detect USB standard downstream ports (SDPs), USB charging downstream ports (CDPs), or dedicated charger ports (DCPs), in addition to proprietary charger adapters from Apple and Sony. When a charging port is detected, the MAX14578E/MAX14578AE will control an external lithium-ion (Li+) battery charger controller to optimize charge time and charging efficiency.
By supporting a broad range of USB chargers, the MAX14578E/MAX14578AE offer consumers a "virtually universal" charging experience. Manufacturers also can now ship equipment without including power adapters, so they simplify their manufacturing supply chain while improving their green credentials.
"The MAX14578E/MAX14578AE allow the consumer to charge from a wide variety of sources," said Andrew Baker, director, Business Management at Maxim Integrated Products. "With this level of flexibility, consumers may never have to own a device with a dedicated charger again."
An on-chip LDO provides a 5.3V output which can be used to power a USB transceiver. In addition, ESD protection on the USB data pins is extended up to +/-15kV (Human Body Model) and +/-8kV IEC 61000-4-2 Contact Discharge. These features substantially reduce system complexity, component cost, and board space for today's highly integrated consumer devices.
The MAX14578E/MAX14578AE are available in a 12-bump, 0.4mm pitch, 1.3mm x 1.68mm WLP package for space-critical applications, and in a 16-pin TQFN package for ease of manufacturing. They operate over the -40 degrees C to +85 degrees C extended temperature range. An evaluation kit is available: MAX14578EVKIT.
Monday, February 13, 2012
China's adapters and power supply industry strengthens global lead
DUBLIN, IRELAND: Research and Markets has announced the addition of the "China Sourcing Report: Adapters & Power Supplies - 2012" report to its offering.
China's adapters and power supply industry strengthens global lead as production is expected to sustain 10 percent annual growth through 2020. Share is forecast to hit 66 percent that year from at least 50 percent at present. Buoyed by this projection, local manufacturers are boosting product development efforts to achieve complementary gains in technology in a bid to close the gap with foreign counterparts.
They concentrate on meeting requirements for miniaturization, and high efficiency, stability, safety and energy savings while complying with international safety standards. This report covers the major products of China's adapters and power supplies industry, namely adapters and converters, and LED and switching power supplies.
Key findings
* Prices will climb in the months ahead, according to the majority of surveyed makers. More than 40 percent are planning a 5 to 10 percent markup and over one-third less than 5 percent. This is because rising raw material and labor costs remain a challenge that is compounded by the appreciating yuan.
* Notwithstanding industry hurdles, most interviewed enterprises are anticipating growth in export sales. North America and the EU remain important destinations despite economic difficulties there, although makers explore the rest of Europe, the Asia-Pacific region and the Middle East.
* Year-end production of AC/DC adapters is predicted to reach 2 billion units or about 60 percent of worldwide yield. The share of switching power supplies is at 80 percent, while linear counterparts continue to decline due to shrinking demand. The latter's low-efficiency feature is a contributing factor.
* LED power supply makers are bolstering manufacture to take advantage of the growing lighting application. The category is anticipated to surge in sales by over 30 percent in 2012.
* Traditional markets in consumer and vehicle electronics, computer and telecom products, home appliances, office automation, power equipment and transportation systems stay strong.
* Models for electric vehicles, solar and wind power, military, industrial, railway and medical equipment are rising in number. Some are even breaking into the mainstream.
China's adapters and power supply industry strengthens global lead as production is expected to sustain 10 percent annual growth through 2020. Share is forecast to hit 66 percent that year from at least 50 percent at present. Buoyed by this projection, local manufacturers are boosting product development efforts to achieve complementary gains in technology in a bid to close the gap with foreign counterparts.
They concentrate on meeting requirements for miniaturization, and high efficiency, stability, safety and energy savings while complying with international safety standards. This report covers the major products of China's adapters and power supplies industry, namely adapters and converters, and LED and switching power supplies.
Key findings
* Prices will climb in the months ahead, according to the majority of surveyed makers. More than 40 percent are planning a 5 to 10 percent markup and over one-third less than 5 percent. This is because rising raw material and labor costs remain a challenge that is compounded by the appreciating yuan.
* Notwithstanding industry hurdles, most interviewed enterprises are anticipating growth in export sales. North America and the EU remain important destinations despite economic difficulties there, although makers explore the rest of Europe, the Asia-Pacific region and the Middle East.
* Year-end production of AC/DC adapters is predicted to reach 2 billion units or about 60 percent of worldwide yield. The share of switching power supplies is at 80 percent, while linear counterparts continue to decline due to shrinking demand. The latter's low-efficiency feature is a contributing factor.
* LED power supply makers are bolstering manufacture to take advantage of the growing lighting application. The category is anticipated to surge in sales by over 30 percent in 2012.
* Traditional markets in consumer and vehicle electronics, computer and telecom products, home appliances, office automation, power equipment and transportation systems stay strong.
* Models for electric vehicles, solar and wind power, military, industrial, railway and medical equipment are rising in number. Some are even breaking into the mainstream.
Friday, February 10, 2012
Mouser arms designers with latest ARM Cortex-M4 Stellaris MCUs from TI
TAIWAN: Mouser Electronics Inc., regarded as a top design engineering resource and global distributor for semiconductors and electronic components, today announced it is stocking the Texas Instruments LM4F230 ARM Cortex-M4 Stellaris MCUs, as well as the LM4F232 evaluation kit.
The ARM Cortex-M4 processor is the latest embedded processor by ARM and addresses digital signal control for efficient, easy-to-use control and added capabilities.
Texas Instruments LM4F230 series ARM Cortex-M4 Microcontrollers (MCUs) are Stellaris devices featuring Advanced Motion Control which include six fault inputs to promote low-latency shutdown, two Quadrature Encoder Inputs (QEI), and a total of 16 advanced PWM outputs for motion and energy applications.
The TI LM4F230 family also integrates a variety of peripherals, including UARTs, I²C, SSI/SPI and CAN controllers, along with two 12-bit analog to digital converters with a total of 24 analog inputs and motion control functions. These Stellaris M-4 MCUs are targeted for motion control and a variety of industrial applications, such as factory automation, power and energy, fire and security, HVAC and building control, and medical instrumentation.
The ARM Cortex-M4 processor is the latest embedded processor by ARM and addresses digital signal control for efficient, easy-to-use control and added capabilities.
Texas Instruments LM4F230 series ARM Cortex-M4 Microcontrollers (MCUs) are Stellaris devices featuring Advanced Motion Control which include six fault inputs to promote low-latency shutdown, two Quadrature Encoder Inputs (QEI), and a total of 16 advanced PWM outputs for motion and energy applications.
The TI LM4F230 family also integrates a variety of peripherals, including UARTs, I²C, SSI/SPI and CAN controllers, along with two 12-bit analog to digital converters with a total of 24 analog inputs and motion control functions. These Stellaris M-4 MCUs are targeted for motion control and a variety of industrial applications, such as factory automation, power and energy, fire and security, HVAC and building control, and medical instrumentation.
Thursday, February 9, 2012
CMOS image sensors continue march to dominance over CCDs
EL SEGUNDO, USA: Bolstered by their use in mobile handsets and emerging product segments, complementary metal-oxide semiconductor (CMOS) sensors in 2011 continued to expand their already commanding lead of the overall image sensor market, pushing rival charge coupled device (CCD) sensors into an increasingly isolated space.
Shipments last year of CMOS sensors accounted for 92 percent of all area image sensors—an overwhelming share that translated into some 2.1 billion units, up 31 percent from 1.6 billion in 2010, according to an IHS iSuppli Consumer Platforms topical report.
With the remaining 8 percent of the market, CCD sensor shipments in 2011 fell to 180.3 million units, down 2 percent from 184.5 million in 2010. In 2010, the CMOS share of the sensor market was 90 percent vs. 10 percent for CCD.
Source: IHS iSuppli, USA.
The pattern of CMOS dominance will continue through the years in the face of CCD’s irreversible decline. By 2015, CMOS shipments will amount to 3.6 billion units or 97 percent market share, compared to CCD shipments of just 95.2 million, or 3 percent.
“CMOS sensors long have been associated with cheaper manufacturing costs, greater efficiency and faster data-throughput speeds,” said Pamela Tufegdzic, analyst for consumer electronics at IHS. “For those reasons, CMOS sensor use has kept expanding in an ever-growing number of devices and applications, while the use of higher-cost CCDs has shrunk steadily.”
Mobile makes up most CMOS shipments
Mobile handsets remain the dominant application for CMOS sensors, representing 79 percent of total CMOS shipments in 2011. Videoconferencing is the second-biggest application market in terms of CMOS shipments, due to the inclusion of cameras in notebook computers.
CMOS sensors also found increasing use in two growing markets—the security space through network video surveillance systems; and in automotive systems through the use of back-up cameras and in such applications as lane-departure warning, blind-spot detection and infrared night vision.
In comparison, CCDs are finding acceptance in the industrial markets and in digital still cameras. But even here, CCD use is declining. Among high-end digital single lens reflex (DSLR) cameras, for instance, CCD use will shrink from 12 percent in 2011 to just 1 percent by 2014. Since the camera space is weakening as a whole while consumers gravitate toward smartphones, overall CCD consumption will decline further, IHS believes.
BSI technology lifts CMOS even higher; use in iPhones is celebrated
The introduction of backside illumination (BSI) technology was the break in camera technology that gave CMOS the edge over CCD. Found in high-end compact cameras as well as the iPhone 4S from Apple Inc. and various Android phones, BSI helps to eliminate noise issues found in earlier frontside illumination (FSI) CMOS sensors, and also enables better picture quality in low-light conditions.
BSI technology is finding demand in higher-end products in which paying a premium for the image sensor is less of a concern, as seen with the iPhone 4 and many Androids on the market today. And even though BSI cost approximately 20 percent more than FSI in 2011, the superior BSI sensor will continue to make inroads into phones. Projected to be in 56 percent of smartphones and higher-end feature handset camera phones during 2012, BSI sensors will be present in 92 percent of the same class of handsets by 2015 as prices come down.
Top sensor players
Among companies competing in the space, Sony Corp. was the top player for overall image sensors during the fourth quarter, followed by OmniVision Technologies, Aptina Imaging Corp., Sharp Corp. and Samsung Electronics Co. Ltd.
Sony announced it has developed a new next-generation BSI sensor in a stacked structure that would pave the way for faster speeds and lower power consumption, with samples to start shipping in March.
For its part, Samsung announced a 16-megapixel CMOS sensor that will be making its way into smartphones and tablets later this year. The S5K2P1 sensor, Samsung says, will be good enough for use even in dedicated digital still cameras and camcorders where superior image quality is a prime consideration, due to the sensor’s excellent sensitivity and low-noise performance.
Going forward, image sensor companies are expected to continue work on reinforcing their CMOS business models, even as they keep exploring ways on how to be first to market with leading-edge solutions, IHS believes. It also is imperative for the industry to bring down the price of BSI technology, which will be critical in securing its place in the CMOS market.
Source: IHS iSuppli, USA.
Shipments last year of CMOS sensors accounted for 92 percent of all area image sensors—an overwhelming share that translated into some 2.1 billion units, up 31 percent from 1.6 billion in 2010, according to an IHS iSuppli Consumer Platforms topical report.
With the remaining 8 percent of the market, CCD sensor shipments in 2011 fell to 180.3 million units, down 2 percent from 184.5 million in 2010. In 2010, the CMOS share of the sensor market was 90 percent vs. 10 percent for CCD.
Source: IHS iSuppli, USA.The pattern of CMOS dominance will continue through the years in the face of CCD’s irreversible decline. By 2015, CMOS shipments will amount to 3.6 billion units or 97 percent market share, compared to CCD shipments of just 95.2 million, or 3 percent.
“CMOS sensors long have been associated with cheaper manufacturing costs, greater efficiency and faster data-throughput speeds,” said Pamela Tufegdzic, analyst for consumer electronics at IHS. “For those reasons, CMOS sensor use has kept expanding in an ever-growing number of devices and applications, while the use of higher-cost CCDs has shrunk steadily.”
Mobile makes up most CMOS shipments
Mobile handsets remain the dominant application for CMOS sensors, representing 79 percent of total CMOS shipments in 2011. Videoconferencing is the second-biggest application market in terms of CMOS shipments, due to the inclusion of cameras in notebook computers.
CMOS sensors also found increasing use in two growing markets—the security space through network video surveillance systems; and in automotive systems through the use of back-up cameras and in such applications as lane-departure warning, blind-spot detection and infrared night vision.
In comparison, CCDs are finding acceptance in the industrial markets and in digital still cameras. But even here, CCD use is declining. Among high-end digital single lens reflex (DSLR) cameras, for instance, CCD use will shrink from 12 percent in 2011 to just 1 percent by 2014. Since the camera space is weakening as a whole while consumers gravitate toward smartphones, overall CCD consumption will decline further, IHS believes.
BSI technology lifts CMOS even higher; use in iPhones is celebrated
The introduction of backside illumination (BSI) technology was the break in camera technology that gave CMOS the edge over CCD. Found in high-end compact cameras as well as the iPhone 4S from Apple Inc. and various Android phones, BSI helps to eliminate noise issues found in earlier frontside illumination (FSI) CMOS sensors, and also enables better picture quality in low-light conditions.
BSI technology is finding demand in higher-end products in which paying a premium for the image sensor is less of a concern, as seen with the iPhone 4 and many Androids on the market today. And even though BSI cost approximately 20 percent more than FSI in 2011, the superior BSI sensor will continue to make inroads into phones. Projected to be in 56 percent of smartphones and higher-end feature handset camera phones during 2012, BSI sensors will be present in 92 percent of the same class of handsets by 2015 as prices come down.
Top sensor players
Among companies competing in the space, Sony Corp. was the top player for overall image sensors during the fourth quarter, followed by OmniVision Technologies, Aptina Imaging Corp., Sharp Corp. and Samsung Electronics Co. Ltd.
Sony announced it has developed a new next-generation BSI sensor in a stacked structure that would pave the way for faster speeds and lower power consumption, with samples to start shipping in March.
For its part, Samsung announced a 16-megapixel CMOS sensor that will be making its way into smartphones and tablets later this year. The S5K2P1 sensor, Samsung says, will be good enough for use even in dedicated digital still cameras and camcorders where superior image quality is a prime consideration, due to the sensor’s excellent sensitivity and low-noise performance.
Going forward, image sensor companies are expected to continue work on reinforcing their CMOS business models, even as they keep exploring ways on how to be first to market with leading-edge solutions, IHS believes. It also is imperative for the industry to bring down the price of BSI technology, which will be critical in securing its place in the CMOS market.
Source: IHS iSuppli, USA.
GT Advanced Technologies to provide large diameter sapphire cores to Chongqing Silian Optoelectronics for production of HB LED substrates
MERRIMACK, USA: GT Advanced Technologies Inc. announced that its subsidiary, GT Crystal Systems, has entered into a purchase agreement with Chongqing Silian Optoelectronics Science & Technology Co. Ltd (Silian) to supply 500,000 TIE (2-inch equivalent) of 6-inch diameter C-plane sapphire cores, which Silian will use to produce high quality sapphire substrates for the high brightness LED industry.
“We are pleased to announce this important agreement for large diameter sapphire cores and to continue our long and successful relationship with Silian,” said Cheryl Diuguid, GT Advanced Technologies’ VP and GM of its Sapphire Equipment and Materials Group. “Silian has an outstanding reputation for providing high quality substrates to some of the most advanced LED producers in the industry. This contract further validates that sapphire material produced in our ASF furnaces is well suited for use in the LED supply chain.”
"ASF-grown sapphire has helped Silian and our customers to achieve the high yields necessary for the maturing LED industry,” said David Reid, COO and GM, Chongqing Silian Optoelectronics Science & Technology Co. Ltd. “The consistency and quality of ASF-grown sapphire has served our business well and we look forward to continued collaboration with GT Crystal Systems.”
GT’s ability to produce LED-grade sapphire at diameters of six inches and larger helps to accelerate the transition to next generation MOCVD production tools capable of handling the larger diameter wafers. Larger substrates allow more efficient MOCVD production processes than current generation MOCVD tools processing two- and four-inch wafers.
The large diameter cores will be produced from boules grown in GT’s ASF sapphire growth furnaces installed in the company’s newly expanded sapphire manufacturing facility in Salem, Massachusetts. This is the same technology which has been sold commercially to GT’s ASF equipment customers.
“We are pleased to announce this important agreement for large diameter sapphire cores and to continue our long and successful relationship with Silian,” said Cheryl Diuguid, GT Advanced Technologies’ VP and GM of its Sapphire Equipment and Materials Group. “Silian has an outstanding reputation for providing high quality substrates to some of the most advanced LED producers in the industry. This contract further validates that sapphire material produced in our ASF furnaces is well suited for use in the LED supply chain.”
"ASF-grown sapphire has helped Silian and our customers to achieve the high yields necessary for the maturing LED industry,” said David Reid, COO and GM, Chongqing Silian Optoelectronics Science & Technology Co. Ltd. “The consistency and quality of ASF-grown sapphire has served our business well and we look forward to continued collaboration with GT Crystal Systems.”
GT’s ability to produce LED-grade sapphire at diameters of six inches and larger helps to accelerate the transition to next generation MOCVD production tools capable of handling the larger diameter wafers. Larger substrates allow more efficient MOCVD production processes than current generation MOCVD tools processing two- and four-inch wafers.
The large diameter cores will be produced from boules grown in GT’s ASF sapphire growth furnaces installed in the company’s newly expanded sapphire manufacturing facility in Salem, Massachusetts. This is the same technology which has been sold commercially to GT’s ASF equipment customers.
GigOptix announces sampling of LX8240 100G coherent TFPS optical modulator
SAN JOSE, USA: GigOptix Inc. has begun sampling the LX8240, a 100G Dual Polarity Quadrature Phase Shift Keying (DP-QPSK) Mach-Zehnder Modulator (MZM), based on GigOptix’s proprietary Thin Film Polymer on Silicon (TFPS) technology.
The addition of the LX8240 MZM strengthens GigOptix’s position in the fast growing 100G DWDM market and adds to GigOptix’s industry leading portfolio of 100G drivers and Transimpedance Amplifiers (TIAs). In its recent optical components report, Ovum identified 100G as the fastest growing segment within optical communications with a CAGR of 107 percent.
Introduced in time for the market takeoff and customer selection of optimized components for the new generation transponders, the LX8240 benefits include its ultra-small form factor, low insertion loss and low power consumption making it ideal for its use in metro, long-haul, and ultra-long haul optical transport applications. This modulator leverages GigOptix's proprietary and disruptive TFPS technology to bringing to customers low power consumption in the smallest footprint modulator available in the market.
Dr. Raluca Dinu, GM and VP of the Optics Product Line at GigOptix, stated: “Our TFPS technology modulator enables the high performance demanded by 100G coherent applications within a small form factor with very low power consumption. The continuous consumer generated demand for more bandwidth is forcing operators to upgrade to next generation 100G networks and we believe that the LX8240 addresses customers’ needs to shrink the size and power of their solutions without compromising on performance.”
The LX8240 engineering samples are manufactured on GigOptix’s production line at Sanmina-SCI in Shenzhen, China and are available for sampling now. “GigOptix’s 100G optical modulator solution is based on groundbreaking technology,” said Dave Dutkowsky, executive VP of Sanmina-SCI’s Communications Networks Division. “We’re excited to have partnered with GigOptix to industrialize this leading-edge technology. Our comprehensive engineering expertise and experience coupled with Sanmina-SCI’s end-to-end supply chain solutions enable us to partner with GigOptix and bring these complex products to market quickly.”
The addition of the LX8240 MZM strengthens GigOptix’s position in the fast growing 100G DWDM market and adds to GigOptix’s industry leading portfolio of 100G drivers and Transimpedance Amplifiers (TIAs). In its recent optical components report, Ovum identified 100G as the fastest growing segment within optical communications with a CAGR of 107 percent.
Introduced in time for the market takeoff and customer selection of optimized components for the new generation transponders, the LX8240 benefits include its ultra-small form factor, low insertion loss and low power consumption making it ideal for its use in metro, long-haul, and ultra-long haul optical transport applications. This modulator leverages GigOptix's proprietary and disruptive TFPS technology to bringing to customers low power consumption in the smallest footprint modulator available in the market.
Dr. Raluca Dinu, GM and VP of the Optics Product Line at GigOptix, stated: “Our TFPS technology modulator enables the high performance demanded by 100G coherent applications within a small form factor with very low power consumption. The continuous consumer generated demand for more bandwidth is forcing operators to upgrade to next generation 100G networks and we believe that the LX8240 addresses customers’ needs to shrink the size and power of their solutions without compromising on performance.”
The LX8240 engineering samples are manufactured on GigOptix’s production line at Sanmina-SCI in Shenzhen, China and are available for sampling now. “GigOptix’s 100G optical modulator solution is based on groundbreaking technology,” said Dave Dutkowsky, executive VP of Sanmina-SCI’s Communications Networks Division. “We’re excited to have partnered with GigOptix to industrialize this leading-edge technology. Our comprehensive engineering expertise and experience coupled with Sanmina-SCI’s end-to-end supply chain solutions enable us to partner with GigOptix and bring these complex products to market quickly.”
Intematix takes command of phosphor sector in supercharged China LED lighting market
FREMONT, USA: Intematix, a leading innovator of patented phosphors and phosphor components for high-quality LED lighting, was named the number one phosphor supplier in China in 2011, according to respected LED market research company Gaogong LED.
Intematix was also named one of the seven most recognizable LED lighting brands by the China National Semiconductor Lighting Association, alongside some of the largest global component and production equipment brands in the LED industry. These accolades highlight Intematix’s position as the top phosphor company in China.
“Intematix has built its phosphor leadership in the Chinese LED market by offering extensive product choice and working closely with our customers,” said Yiqun Li, CTO and executive VP at Intematix. “We look forward to 2012 as the LED market in China continues to grow.”
According to Gaogong’s statistics, China produced 32 billion yuan ($5.1 billion) in packaged LEDs in 2011, more than a third of the global total and at an annual growth rate of 18 percent.
Intematix has expanded its diverse product offering in the last year with 14 new phosphor products and its remote phosphor product line, ChromaLit. Intematix supplies many of China’s leading manufacturers, and its global production and certified quality system enabled its significant market share.
Intematix opened its new 124,000 square foot facility in Suzhou, China, significantly increasing the company’s Chinese manufacturing presence, and Intematix’s Shenzhen-based office helped strengthen its reputation in China by providing comprehensive sales and applications support to customers. As China continues to grow as an LED manufacturing and applications powerhouse, Intematix has positioned itself to great advantage.
Intematix was also named one of the seven most recognizable LED lighting brands by the China National Semiconductor Lighting Association, alongside some of the largest global component and production equipment brands in the LED industry. These accolades highlight Intematix’s position as the top phosphor company in China.
“Intematix has built its phosphor leadership in the Chinese LED market by offering extensive product choice and working closely with our customers,” said Yiqun Li, CTO and executive VP at Intematix. “We look forward to 2012 as the LED market in China continues to grow.”
According to Gaogong’s statistics, China produced 32 billion yuan ($5.1 billion) in packaged LEDs in 2011, more than a third of the global total and at an annual growth rate of 18 percent.
Intematix has expanded its diverse product offering in the last year with 14 new phosphor products and its remote phosphor product line, ChromaLit. Intematix supplies many of China’s leading manufacturers, and its global production and certified quality system enabled its significant market share.
Intematix opened its new 124,000 square foot facility in Suzhou, China, significantly increasing the company’s Chinese manufacturing presence, and Intematix’s Shenzhen-based office helped strengthen its reputation in China by providing comprehensive sales and applications support to customers. As China continues to grow as an LED manufacturing and applications powerhouse, Intematix has positioned itself to great advantage.
Subscribe to:
Posts (Atom)
